Reese 30845 25K ELITE SERIES GOOSENECK User Manual
Page 8
30845IN
– 31OCT12D PCN18116 ©2005, 2012 CEQUENT PERFORMANCE PRODUCTS, INC. Litho in USA
8
For Kits 30845, 40845 & 50845
8.
When properly installed, all the Anchor Handles should be parallel to the
Signature Series
Gooseneck Hitch when
locked. The Anchor Handles are Unlocked when rotated 90 degrees (perpendicular to the
Signature Series
Gooseneck Hitch). See Figure 14.
WARNING:
Failure to properly install handles could result in tow vehicle damage.
Anchor Handle “A”
Locked Position
Anchor Handle “B”
Locked Position
Anchor Handle “B”
Unlocked Position
Anchor Handle “A”
Unlocked Position
Fig. 14
Top of Hitch Shown
WARNING:
To prevent serious damage to
truck and/or persons both Lynch
Pins Must be installed through
the holes in the Anchor Handles
for the hitch to be properly
locked.
Lynch Pin through
holes in Anchor Handles
See sketch below
Install Lynch Pin through
holes in Anchor Handles to lock
Anchor Handle “A”
Anchor Handle “B”