Guidelines for matching hitch, truck, and trailer – Reese 30081 SELECT SERIES 20K FIFTH WHEEL User Manual

Page 12

Advertising
background image

30081N-7 July10 F

PCN13787 ©2010 CEQUENT PERFORMANCE PRODUCTS, INC

LITHO IN USA

FOR KITS: 30081, 40261 & 50181

12

1. Check Tow Ratings:

Vehicle Tow Rating:_______________________.

5th Wheel Kit

Hitch Rating:_____20,000 lbs.__.

Gross Trailer Weight (Figure 12):______________.

*Trailer weight should be the lowest of these recorded ratings for safe towing conditions.

2.

Cequent Performance Products

hitches are designed for use with recreational fifth wheel trailers only. Hitch

applications other than recreational fifth wheel trailers must be approved in writing by

Cequent Performance Products’

Engineering Department.
3. Use only a SAE 2-inch kingpin with your 20K Fifth Wheel Hitch.
4. Approximately 15%-25% of trailer weight should be on hitch (Pin Weight). See Figure 13.

FACTORY TRAILER + FULL WATER

TANKS + CARGO, ETC.

= GROSS TRAILER WEIGHT

Figure 12

15-25%

GROSS TRAILER

WEIGHT

(PIN WEIGHT)

75-85%

GROSS TRAILER

WEIGHT

Figure 13

GUIDELINES FOR MATCHING HITCH, TRUCK, AND TRAILER

WARNING:

Failure to follow all of these instructions may result in death or serious injury!

WARNING:

Failure to check and follow tow ratings could result in tow vehicle

damage or truck and trailer separation while towing.

Trailer and its contents together must not exceed truck, hitch and/or trailer tow

ratings.

Towing vehicle must have a manufacturer’s rated towing capacity equal to or

greater than the gross trailer weight (dry weight of the trailer plus payload of the
trailer). (Figure 12)

Gross weight of trailer must not exceed 20,000 pounds.

King pin weight must not exceed 5,000 pounds (Figure 13). If in doubt have king

pin weight measured by qualified facility.

Advertising