Reese 30081 SELECT SERIES 20K FIFTH WHEEL - Manual (Page 3)

30081N-7 July10 F PCN13787 ©2010 CEQUENT PERFORMANCE PRODUCTS, INC LITHO IN USA
FOR KITS: 30081, 40261 & 50181
3
ADDITIONAL MOUNTING INSTRUCTIONS:
Install base rails as instructed in base rail instructions. The instruction below is for the
addition of the 2 center bolts for applications using 30095.
1. Place base rails in accordance with base rail mounting instructions.
2. BEFORE DRILLING ANY HOLES, CHECK FOR CLEARANCE AROUND THE GAS TANK.
3.
Using the center hole in the base rail as a guide, drill a ½” hole through the truck bed.
4. Insert ½” carriage bolt (29) into the hole. Install ½” serrated washer (31), ½” lock washer (32) and ½”
nut (33).
5. Insert spacer (30) between the truck bed and the base rail. It will go in between at the corrugation of the
bed. To keep bed from crushing when the bolt is tightened.
6. Repeat for the other base rail.
7. Torque the ½” nuts to 75 ft/lbs.
½” CARRIAGE BOLT (29)
SPACER (30)
SERRATED WASHER (31)
LOCK WASHER (32)
½” HEX NUT (33)
INSTALL BOLT IN EITHER POSITION WHICHEVER
IS CLOSER TO UNDER BED SUPPORT
SUPPLEMENT TO 30095N