Reese 30868 RAIL KIT - Manual

30868N – 9FEB11D PCN14805 ©2011 CEQUENT PERFORMANCE PRODUCTS, INC. LITHO IN USA
INSTALLATION INSTRUCTIONS
MOUNTING KIT
GENERAL MOTORS 2011
Chevrolet Silverado/GMC Sierra
2500HD & 3500HD
For Installation Assistance or Technical Help, Call 1-888-521-0510
DEALER/INSTALLER:
(1) Read all instructions before installation
(2) Provide this Manual to end user.
END USER:
(1) Save this Manual for future reference.
(2) Pass on copies of Manual to any other user or owner of Hitch.
Note: GMC/Chevrolet 2500/3500 8’ bed chassis
pictures are shown through out these instructions.
The 6’ bed will have a hat channel directly above the
rear axel. The same installation process will be used
for the 6’ bed but the rails will be located
approximately as shown in
figures 13 & 14.
17
PART QTY.
1 BASE RAIL (2)
2 FRAME BRACKET – LEFT HAND (1)
3 FRAME BRACKET – RIGHT HAND (1)
4 5/8-11 BUTTON HEAD SCREW (4)
5 5/8-11 GRADE 8 CARRIAGE BOLT 2” (4)
6 ¾-10 GRADE 8 HEX HEAD BOLT 2” (4)
7 5/8-11 GRADE 8 NUT (4)
8 5/8 LOCK WASHER (4)
9 SPACER (SQUARE HOLE) (4)
10 PULL WIRE (2)
11 PUCK (4)
12 TRIM RING (4)
13 ¾” CONICAL WASHER (4)
14 5/8” CONICAL WASHER (4)
15 NUT / SPACER ASSEMBLY (4)
16 PUCK PLUG (4)
17 5/8” FLAT WASHER (4)
Front of
vehicle