Reese 56005 OUTBOARD CUSTOM QUICK INSTALL KIT - Manual

©2012 Cequent Performance Products, Inc. Sheet 1 of 5 56005N 2/16/2012 Rev. A
Equipment Required:
Fastener Kit: 56005F
Wrenches: 3/4, 7/8, 15/16, 15 mm
Drill Bits: 1/8”, 9/16”
Other Tools: Center Punch, Measuring Tape
Vehicle Forward
Figure 1
2008 – 2010 shown
All Fasteners
Typical Both Sides
Fasteners listed below are supplied with this kit, all other unidentified
fasteners are supplied with part number 30153.
Installation Instructions
CUSTOM QUICK INSTALL MOUNTING KIT
FOR 30153 REESE ® RAILS ONLY
1999 To 2010 Ford Super Duty F-250/F-350 & 2008 To 2010 F-450
WARNING:
Under no circumstances do we recommend exceeding the towing vehicle manufacturers recommended vehicle towing
capacity.
READ ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION
REESE ® Custom Quick Install mounting brackets only include the hardware to attach the custom brackets to the frame.
10 BOLT INSTALLATION
Part Number:
56005
Figure 2
1999 – 2007 shown
1
2
7
8
9
10
13
12
11
1
2
9
13
12
11
8
7
14
15
Item Description Quantity Item Description Quantity
1 NUT, HEX 1/2"-13 4 9 BOLT CAR 5/8"-11 X 2-1/2" Grade 8 2
2 WASHER CONICAL 1/2" 4 10 BLOCK 5/8" x 1-1/2" x 2-1/8" 2
3 WASHER FLAT 1/4" (Figure 3c) 2 11 SPACER 1/4" x 1 1/2" x 3" 2
4 NUT, NYLOK 1/4"-20 (Figure 3c) 1 12 LOCKWASHER 5/8" PLATED 2
5 BOLT, HEX HEAD 1/4"-20 x 1 1/4" Grade 2 (Figure 3c) 1 13 NUT, HEX 5/8"-11 Grade 8 2
6 L-BRACKET (Figure 3c) 1 14 DRIVER'S SIDE FRAME BRKT 1
7 CLAMP FRONT 2 15 PASSENGER'S SIDE FRAME BRKT 1
8 BOLT CAR 1/2"-13 X 4.5" Grade 8 4