Multitasker – Altinex Video Scaler Card MT106-103 User Manual

Page 13

Advertising
background image

MULTITASKER

400-0394-007

12

14. [MODER]

This command sets the resolution of the video
output.

Command Format: [MODERxCn]

x

= Resolution (x = # from 0 to 7)

0

= 640x480 (VGA)

1

= 480p

2

= 800x600 (SVGA)

3

= 1024x768 (XGA)

4

= 1280x1024 (SXGA)

5

= 567p

6

= 720p

7

= 1080i

8

= 1280x768 (WXGA)

9

= 852x480 (WVGA)

Cn = Card ID (n = # from 1 to max slots)

Example:

Send the command [MODER4C4] to set the
resolution of the card in slot 4 to 1280x1024.

15. [BRIGHTm]

This command sets the brightness level to an
absolute value.

Command Format: [BRIGHTmCn]

m

= Level (m = # from 0 to 48, default=24)

Cn = Card ID (n = # from 1 to max slots)

Example:

Send the command [BRIGHT12C3] to set the
output brightness to 12 on the card in slot 4.

16. [BRIGHT]

This command displays the brightness setting
and makes the brightness function active for use
with the [+] and [-] commands.

Command Format: [BRIGHTCn]

Cn = Card ID (n = # from 1 to max slots)

Example:

Send the command [BRIGHTC4] to select the
brightness function on C4. Then use the [+] and
[-] commands to increase or decrease the
brightness level as desired.

17. [CONTRm]

This command sets the contrast level to an
absolute value.

Command Format: [CONTRmCn]

m

= Level (m = # from 0 to 48,default=40)

Cn = Card ID (n = # from 1 to max slots)

Example:

Send the command [CONTR30C4] to set the
output contrast to 30 on the card in slot 4.

18. [CONTR]

This command displays the contrast setting and
makes the contrast function active for use with
the [+] and [-] control commands.

Command Format: [CONTRCn]

Cn = Card ID (n = # from 1 to max slots)

Example:

Send the command [CONTRC4] to select the
contrast function on C4. Then use the [+] and [-]
commands to increase or decrease the contrast
level as desired.

19. [COLORm]

This command sets the color level to an
absolute value.

Command Format: [COLORmCn]

m

= Level (m = # from 0 to 48,default=24)

Cn = Card ID (n = # from 1 to max slots)

Example:

Send the command [COLOR12C4] to set the
output color level to 12 on the card in slot 4.

Advertising