Altinex Video Scaler Card MT106-103 - Manual (Page 21)

MULTITASKER
400-0394-007 20
6: HUE (0)
1: +
2: -
7: ASPECT RATIO (4:3)
1: 16:9
8: 3D COMB FILTER (ON)
1: OFF
9: NOISE REDUCTION (ON)
1: OFF
A: FREEZE (OFF)
1: ON
3: VERSION
This selection displays the model number
and firmware revision, and then redisplays
the Main Menu.
4: STATUS
This selection displays the card status and
then redisplays the Main Menu.
5: HELP
This selection displays a list of commands
available for the MT106-103 along with a
brief description.
ESC
This selection returns you to the parent
menu with the listing of all cards.
7.4.5 MENU MODE EXAMPLES
All Menu Mode examples assume an
MT106-103 is installed in slot 4 of unit ID 1.
NOTE: The communication software you use
may echo each character as it is typed
when entering numeric values (not
selecting menu items). For example,
entering a value of 03 may appear as
0033 on the screen.
1. Change Output Resolution
An MT106-103 is in slot 4. Change the output
resolution to 1280x1024. Start by clicking the
mouse in the Terminal Window. Follow the
keystrokes below:
Enter List of systems
1 Select unit ID 1
04 Select MT106-103 in slot 4
2 Select Setup Menu
1 Select OUT RESOLUTION
5 Select 1280x1024
ESC Return to Setup Menu
ESC Return to the Main Menu
2. Adjust Brightness
Increase the brightness on the output of the
MT106-103
in slot 4. Starting from the
MT106-103's Main Menu, follow the keystrokes
below:
2 Select SETUP
2 Select BRIGHTNESS
1 Increment by one
Repeat until the desired brightness is
achieved.
ESC Return to SETUP
ESC Return to the Main Menu
3. Display Card Status
Display the status of the MT106-103 in slot 4
starting from its Main Menu.
4 Display card status
NOTE: The Main Menu will be redisplayed
after the status is displayed.