Actiontec electronic 802PSG - Manual (Page 11)

8
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
9
Chapter 2 Setting Up the Print Server
3. Plug the large end of the Power cord into an electrical wall outlet, and the
smaller end in the Power (marked “12 VDC ”) on the back of the Print Server.
4. Make sure the Power and LAN lights on the front panel of the Print Server are
blinking or glowing steadily.
The Print Server is connected to a computer. Next, go to “Configuring the Print
Server,” below.
Configuring the Print Server
To configure the Print Server:
1. Insert the Installation CD in the CD - ROM drive of the computer. When the
window shown below appears, click Install Print Server Manager.