Actiontec electronic 802PSG - Manual (Page 18)

14
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
15
Chapter 2 Setting Up the Print Server
Configuring the Printer’s Settings
To configure the printer’s settings:
1. After the computer restarts, from the desktop, select Start, Settings, Control
Panel, and Printers and Faxes. Right-click on the name of the printer and
from the menu that appears, select Properties.
2. In the “Printer Properties” window, select Ports. From the “Port” list, select the
PrintServer Network Port that corresponds to the Print Server port to which
the printer will be connected. In the example below, the “P3” port (one of the
Print Server’s
USB ports) has been selected. Click Apply, then Close.
The printer is now configured properly. Next, go to “Connecting the Printer,” on
the next page.