Securitron AQD5B - Manual

Tel 1.800.MAGLOCK [email protected]
1.800.624.5625 www.securitron.com
© Copyright, 2013, all rights reserved Page 1 P/N 500-30010
Rev. A, 04/13
AccuPower AQD5B
Installation Instructions
Recommended Tools & Additional Materials
#2 Phillips Screw Driver Wire connectors Lead Acid or Gel Cell Batteries*
1/16” Flat head Screw Driver 6-32 x 1/4 Mounting Screws (QTY 4)
*See Battery sizing guide on page 6.
AccuPower AQD5B Power Supply/Battery Charger Specifications
Mechanical Electrical Environmental Regulatory
Physical Size:
Board: 6 1/8” x 3 7/8” x 2 1/8”
Mounting: 4 1/2” x 3 3/8”
Weight*
AQD5B
1.4 lbs
Input Voltage Operating Range
110-240VAC
47-63Hz
Maximum Output Voltage
72 VA
6 Amps @ 12VDC (±10%)
3 Amps @ 24VDC (±10%)
Continuous Output Voltage:
5 Amps @ 12VDC ((±10%)
3 Amps @ 24VDC (±10%)
Voltage Range:
10.4 -13.7 VDC/ 13.65 typical
20.0-27.5 VDC/ 27.3 typical
Frequency
132KHz
Operating
Temperature
0ºF to 130ºF
[-17 to 54ºC]
Humidity
10% to 95% RH
For Indoor use UL294 Listed
UL603 Listed
cUL Listed
RoHS Compliant