SecurityMan ClockCamDVR User Manual
Page 14
6
recording or motion recording accordingly. During activation, clock-camera will make two
beeping sound to indicate activation is successful. Press the
STOP or TRIGGER OFF
buttons to disable manual recording or disable motion recording accordingly. During
disabling, the clock-camera will beep once to indicate disabling is successful.
Tips:
•
The RC uses infrared signal to communicate with the receiver module by direct line of
site, please ensure objects are not hindering when RC is in use.
•
RC distance is 10m direct line of site, if the transmitting distance is short and looses
accuracy it is a sigh of low voltage, please replace the battery.
•
If clock-camera is not in use please remove the battery from the RC to avoid circuit
damage.
•
To replace battery; reference the diagram illustrated at the back side of the RC.