SecurityMan ClockCamDVR - Manual (Page 23)

15
2. Connect one end of the power adapter jack to the ClockCamDVR power socket and
plug the other end into an electrical power outlet as illustrated below. Then turn on the
camera and recorder using the power ON/OFF switch located at the back side.
3. Find a suitable location to mount the ClockCamDVR system, recommended to install
6-7ft high above floor level in an area intended for surveillance monitoring and recording.
For better viewing angle coverage, the hidden camera is fixed at a 20 degree downward
angle. Please adjust the mounting height according to desire view. The camera viewing
coverage is vertical 35° & horizontal 46° (as shown below).
6-7ft high above
floor level