SecurityMan ClockCamDVR - Manual (Page 28)

20
3. ClockCamDVR does not mount as a mobile drive when connecting to a computer. Make
sure to plug the USB receptacle into a USB built-in port of the computer and not through
other third party USB hub(s). Ensure the power is switch to the off position, plug in the
USB cable from the clock to the computer first and then turn the power switch back on.
4. If the clock is running behind on time, please check the battery or replace it with a new
standard AA cell battery.
5. The camera angle is too low for the monitoring areas. Since the camera angle has a
fixed angle at 20 degrees by default and cannot be adjusted, please mount the clock-
camera in a higher position so monitoring areas will be higher.