Sentry Industries CA756 - Manual (Page 10)

19
18
calculation or to advance to the next execution after a
calculation result is obtained.
Answer/Minus key
Pressing followed by will recall the last calculation
result. When used during program execution, the last result
calculated is recalled.
Press following key to entering a numeric value to
make that value negative.
Ex. -123 123
Press following key to input a space.
Numeric/Decimal point/Exponent input keys
When entering numeric values, enter the number in order.
Press the key to enter the decimal point in the desired
position.
To input 1.23x10 -6 , press 1 23 6.
key combinations for the various modes are as
follows:
Calculation keys
Arithmetic
operation keys
For addition, subtraction, multiplication and division, enter
the calculation as it reads. key combinations for the
various modes are as follows:
COMP mode
, ... Following , this key causes the
graph currently shown on the display to be enlarged or
reduced in accordance with the factor setting.
COMP mode or SD mode
... Coordinate transformation
LR mode
...Estimated value calculation of x and y
...Coordinate transformation
S6600G-ENG-A 8/30/04, 11:05 AM Page 18-19 Adobe PageMaker 6.5C/PPC