Sentry Industries CA756 User Manual
Page 12
23
22
• When pressed following the
key in the BASE-N
mode, the subsequently entered value is specified as a
decimal value.
Square/Fraction key
• Press after a numeric value is entered to obtain the
square of that value.
• Press following
key prior to inputting number in
order to obtain fraction part of that number.
• Press followed by
in the BASE-N mode to specify the
hexadecimal calculation mode.
• When pressed following the
key in the BASE-N
mode, the subsequently entered value is specified as a
hexadecimal value.
Common logarithm/Antilogarithm key
• Press prior to entering a value to obtain the common
logarithm of that value.
• When pressed following the
key, the subsequently
entered value becomes an exponent of 10.
• Press followed by
in the BASE-N mode to specity the
binary calculation mode.
• When pressed following the
key in the BASE-N
mode,the subsequently entered value is specified as a
binary value.
Natural logarithm/Exponential key
• Press prior to entering a value to obtain the natural
logarithm of that value.
• When pressed following the
key, the subsequently
entered value becomes an exponent of e.
• Press followed by
in the BASE-N mode to specify the
octal calculation mode.
• When pressed following the
key in the BASE-N
mode,the subsequently entered value is specified as an
octal value.
Reciprocal/Factorial key
• Press after entering a value to obtain the reciprocal of that
value.
• When pressed following the
key, the factorial of a
previously entered value can be obtained.
• Press in the BASE-N mode to enter A (10
10
) of a
hexadecimal value.
Degree/minute/second key (decimal
sexagesimal key)
• Press to enter sexagesimal value (degree/minute/second
or hour/minute/second).
Ex. 78°45'12"
78
45
12
• When pressed following the
key, a decimal based
value can be displayed in degrees/minutes/seconds
(hours/ minutes/seconds).
• Press in the BASE-N mode to enter B (11
10
) of a
hexadecimal value.
Hyperbolic key
• Pressing
, and then
,
,or
prior to
entering a value produces the respective hyperbolic
function (sinh, cosh, tanh) for the value.
• Pressing
, then
, and then,
,
, or
prior to entering a value produces the respective
inverse hyperbolic function (sinh
-1
, cosh
-1
, tanh
-1
) for the value.
S6600G-ENG-A
8/30/04, 11:05 AM
Page 22-23
Adobe PageMaker 6.5C/PPC