SKC Limited SPLIT2 - Manual (Page 5)

5
DIAGRAMS AND PARTS LIST
Please unpack your new SPLIT2 and ensure that your kit is complete.
1 SPLIT2 unit, carry pouch not pictured
2 Detachable sensor on a ‘curly’ cable
5 IOM front plate
3 Sensor mounting bracket with lapel clip
2 Detachable sensor on a ‘curly’ cable as above
with IOM fitted to rear. (Bracket not attached)
Diagram shows the parts of the rear to sensor head
4 IOM cassette front with washer, cap and clip
6 Calibration post
7 Zeroing filter
}
not illustrated
Location Pin
Side View
Attaching accesories
Sensor plugs in here
On/off reset
Charging socket
(Unit pictured from side in
pouch)
Side view
of sockets
See below Data
Transfer
port 4 button
controls
6 Calibration post
7 Zeroing filter
8 Computer cable
9 Factory calibration certificate
10 CD - manual and software
1 SPLIT2 unit in carry pouch, with detachable strap
2 Detachable sensor on a ‘curly’ cable, with IOM body,
and complete IOM cassette.
3 Sensor mounting bracket with lapel clip
4 IOM cassette front with washer, cap and clip
5 IOM front plate
Sensor head with IOM
attached
side view
rear view
Sensor head
front view
parts of the front
cassette