Hyundai H-MS2300 - Manual (Page 12)

- 12 -
Digital clock function
The set has a built-in digital clock, which is displayed when the unit is in standby mode or when you
press and hold PROGRAM button for two seconds during DISC or radio operation.
To set the correct time, follow this procedure:
Switch unit to stand-by mode (display light is off).
Press and hold PROGRAM button for 3 seconds. Display shows 12 hour or 24 hour (flashing).
Press NEXT or BACK button to select 12 hour or 24 hour clock display system and press
PROGRAM button to confirm your selection.
Press NEXT or BACK button repeatedly to set the correct hour in the display and press PROGRAM
button to confirm.
Press NEXT or BACK button repeatedly to set the correct minute in the display and press
PROGRAM button to confirm.
Correct time is now set and will be shown in the display.
Automatic power On/Off timer function
This set has a timer function to enable you to program the unit to automatically switch on or off at
preset times. This is useful as a morning alarm clock.
How to set timer
1. Press and hold TIMER button. The symbol appears in the display.
2. Press NEXT or BACK button to adjust the hour of the desired “ON” time and then press TIMER
button to confirm.
3. Press NEXT or BACK button to adjust the minutes of the desired “ON” time and then press
TIMER button to confirm.
4. Now the symbol in the display changes to show .
5. Press NEXT or BACK button to adjust the hour of the desired “OFF” time and then press TIMER
button to confirm.
6. Press NEXT or BACK button to adjust the minutes of the desired “OFF” time and then press
TIMER button to confirm.
7. Now the display will indicate the wake up mode (CD or radio or USB). Press NEXT button to
choose the desired mode and press TIMER button to confirm.
8. The display then shows the “wake up volume level” (loudness).
Press NEXT or BACK button to increase or decrease the volume level to be used for the music to
be played when the timer switches on the unit at the pre-set time.
9. Press TIMER button to confirm.
10. Finally the unit will return to the normal display, except that the symbol will be
shown, to indicate that you have programmed a power ON/OFF alarm setting.
11. In case you wish to disable the timer, press TIMER and the symbol disappears.
Note: The automatic power ON/OFF timer will switch on the unit as if you have manually pressed the
POWER ON/OFF button. If you have selected “wake to radio”, the exact preset radio band and
station will become activated when power switches on.
Automatic power off (sleep) function
This set has a special sleep timer function, which can automatically switch off the unit. This is useful
for sleeping to music at night.
At any time while the unit is operating (Disc player or radio), press SLEEP button repeatedly to
choose the automatic power off time.
(* OFF means sleep timer is deactivated)