Hyundai H-MS2300 - Manual (Page 8)

- 8 -
Installation of batteries
In the remote control
1. Remove the battery compartment cover.
2. Insert two batteries (size AAA) correctly, so that the + and - polarities match the polarity diagrams in
the battery compartment.
Note: When the batteries are exhausted, the remote control can no longer operate the system. Replace
both batteries at the same time with new ones.
In the unit
1. Remove the battery compartment cover.
2. Insert two batteries (size AA) into the compartment correctly, so that the + and - polarities match the
polarity diagrams in the battery compartment to save all the options when you plug the unit off.
Notes:
Don’t use an old battery with a new one.
Don’t use different types of batteries together.
When the unit is not used for a long period of time, remove the batteries to avoid damage caused by
battery leakage and corrosion.
Power supply connections
This set works on normal household AC-power.
Make sure the set voltage of the unit matches your local voltage.
Insert the plug of the AC-cord into a wall outlet with AC-power.
Press the POWER ON/OFF button to switch on the unit.
Note: When the power is on the entire digital display will be lit up with a blue back-light. This
indicates the HI-FI is switched on.
1. This unit is designed to operate without ever being totally powered off. It will either be on or in
standby mode.
2. In standby mode, the blue backlight of the digital display will be switched off but the display will
show the current time (clock function).
3. When in standby mode, you can use the power switch (on remote control or on front panel of the
main unit) to switch on the unit.
4. To save electricity, please switch the unit to standby mode when not listening to radio or CD music.