Hyundai H-MS2300 - Manual (Page 13)

- 13 -
Snooze function
Whenever the alarm (radio or cCD or USB) comes on, it can be temporarily suspended for a short
period of 9 minutes, by pressing the SNOOZE button (on remote control) once. The alarm (radio or
CD or USB) will then automatically come on again after the 9 minutes “snooze” period has ended.
The procedure can be repeated up to an hour.
Equalizer
Press EQ button repeatedly to choose the desired sound effect according to the music you are listening
to:
Repeat playback function
At anytime during playback press REPEAT button repeatedly to select:
REPEAT -------
to repeat the current track.
REPEAT A B ------ Step 1 - press once to select start point (a)
Step 2 - press second time to select end point (b)
Step 3 - then the selected segment of music (from "a" to "b") will be repeated
until you press REPEAT button again.
REPEAT FOLDER -- to repeat all songs from currently selected Folder (directory)
REPEAT ALL ----
to repeat all track (full cd)
Random play function
The unit is equipped with a special function, which allows you to listen to all the tracks (songs) on a
CD in random order.
To activate this function, simply press the RANDOM button once, the display shows “RND”.
To cancel random-play function, simply press RANDO” button once.
Anti-skip (antishock) function (ESP)
This unit has a built-in digital anti-skip function, which prevents CD skipping when the unit is
physically moved or subjected to vibrations for up to approx. 20 seconds when playing CD-MP3
discs and up to approx. 8 seconds when playing CA-AUDIO (CD-DA) discs.
Whenever any CD or CD-MP3 disc is played, the anti-skip memory needs about 30 seconds to fill
up. The maximum anti-skip function (with maximum duration) will be available only after the
memory has been filled up.
Note: Please note that the anti-skip function only protects against normal vibration or minor movement.
Severe or strong shocks/vibrations to the unit may still cause skipping.
Using the audio line in connection (AUX input)
You can connect the audio output of an external device such as a MP3 player to this unit, to listen to
the sound of that device (MP3) through the high quality amplifier of this music system.
To connect the external device please use a standard RCA cable to connect the audio line-out of the
device (left and right channels) to the AUX line-in RCA jacks (left and right) on the rear panel of this
unit.
Press FUNCTION button to switch to the “AUX” function.
Switch on the power of the main unit and the external device (eg. MP3 player).
Start playback of the external device (MP3) and adjust the volume control of the main unit to the
desired level.
Remember to switch off the power of the music system (main unit) when you are finished using the
external device.