System setup – Acura 2009 TSX 00X31-TL1-8001 User Manual

Page 117

Advertising
background image

116

Navigation System

System Setup

System Information

From the

SETUP

screen (

Other

), say

or select

System Information

and the

following screen appears:

Displays the information on the
navigation system software. This
information is for dealer use only. For
ordering updates, use the version
number stamped on the label (as Ver.
X.XX) of the navigation DVD. See
Obtaining a Navigation Update DVD on
page 124.

When finished, say or select

Return

to

return to the previous screen.

Rearview Camera

Your vehicle is equipped with a
rearview camera as shown in the
illustration.

Whenever you shift to R (Reverse) with
the ignition switch in the ON (II)
position, the rear view is shown on the
navigation screen. For the best image,
always keep the rearview camera lens
clean, and be sure it is not covered.

Since the rearview camera display area
is limited, you should always back up
slowly and carefully, and look behind
you for obstacles.

Rearview Camera Brightness
Adjustment

When in reverse, the navigation “hard”
buttons are locked out, except the
rotating portion of the

Interface Dial

(

knob

). Rotate the

knob

clockwise to

make the camera image brighter, and
counterclockwise to darken the image.
This brightness adjustment is
independent of the screen brightness
adjustment in SETUP.

NOTE:
• The camera brightness cannot be

adjusted by voice control.

• Slight delays can occur when

switching to the camera image, or
switching back to the

map/menu

screen. This is normal.

Rearview
Camera

Advertising