Replacement procedure, Replacement procedure 50 – Apple MacBook Pro 17-inch (original, Core 2 Duo, 2.4GHz, Late 2007 CTO, Early 2008, and Late 2008) User Manual
Page 50
MacBook Pro 17-inch (original, Core 2 Duo, 2.4/2.6GHz, 2008) Take Apart — Keyboard
50
Replacement Procedure
When replacing the keyboard, here are some key points to keep in mind:
Prevention of scratches to the cosmetics of the top case
•
All tabs are properly seated
•
Keyboard lays flat
•
Bend-tabs are not damaged
•
Screw holes align
•
Cables are not caught
•
Cable connectors are not damaged and cables are secure
•
Kapton tape is applied as before
•
Insulator film is correctly installed
•
Before replacing or installing a replacement keyboard, verify that the bend-tabs along the
1.
bottom edge of the keyboard are straight and parallel with the bottom edge (two are shown
close-up, below).
Important: Do not bend any otaher bend-tabs on the keyboard other than the four along
the bottom. Other tabs hold the keyboard assembly together.