Installation, 1 transportation – IAI America RCS2-GR8 User Manual
Page 26
2. Installation
20
2. Installation
2.1 Transportation
[1] Handling of the Robot
Unless otherwise specified, the actuators are wrapped individually when the product is shipped out.
(1) Handling of the Packed Unit
�
Do not damage or drop. The package is not applied with any special treatment that enables it to
resist an impact caused by a drop or crash.
�
An operator should never attempt to carry a heavy package on their own. Also, use an
appropriate way for transportation.
�
Keep the unit in horizontal orientation when placing it on the ground or transporting. Follow the
instruction if there is any for the packaging condition.
�
Do not step or sit on the package.
�
Do not put any load that may cause a deformation or breakage of the package.
(2) Handling after Unpackaged
�
Do not carry the actuator by holding the cable, or do not move it by pulling the cable.
�
When transporting the actuator main unit, hold the base or bracket part.
�
Do not hit or drop the product while carrying.
�
Do not give any excessive force to any of the sections in the actuator.