IAI America RCP4W - Manual (Page 42)

2. Installation
36
٧ Ceiling Type (Top)
Shown in the figure below is the right ceiling mount type. For the left ceiling mount type, the
positions of tapped holes are on the opposite side when looking in the front view.
ڏ Bottom
Bracket (Front) Bracket (Rear)
Tapped
hole
Tapped
hole
Tapped
hole
Tapped
hole
Actuator Type
Bracket (Front)
Tapped Hole
Bracket (Rear)
Tapped Hole
Tapping
Diameter
Tightening Torque
[N•m]
SA5C 2×M3, depth 6 2×M3, depth 6 M3 0.83
SA6C 2×M3, depth 6 2×M3, depth 6 M3 0.83
SA7C 2×M3, depth 6 2×M3, depth 6 M3 0.83
Mounting screw
x Make sure to have the length of at least 1.8 times to the bolt diameter below for the effective
length of screw engagement for the tightening of a bolt and a female screw.