IAI America DS-S-T1 - Manual (Page 19)

Page 17
F1 F2 F3 F4
Prog
Posi Aprg
Posi
Mdi Teac Step Etc
F1 F2 F3 F4
Mdi - 1 No 1 [1] - 2
XXXXX.XXX XXXXX.XXX
Inc Dec Clr Del
F1 F2 F3 F4
Program Mode Screen:
Press the F1 Key (Posi).
Position (Position Data) Edit Screen:
Press the F1 Key (Mdi - manual data input).
Position Number Input Mode:
The cursor is on the position number location.
XXXXX.XXX will display if there is no data.
Press the Return Key and match the cursor to
the position data for Axis 1.
Position data Axis 1 Axis 2
Mdi - 1 No 1 [1] - 2
Position # Axis Name
Axis # No. of axes connected
Note 1: For existing data, keep pressing the F1
Key until reaching the screen which displays
the XXXXX.XX. Then, execute data input, or
do a substitution so that the previous data will
dissappear.
8. Examples of Simple Operation Procedure
Note 2: This screen can only display up to a maximum
of four axes. When the number of axes are
over five, please refer to Page 50 for
reference.
Screen explanation: