IAI America S-SEL-E - Manual (Page 95)

Page 90
When programming is completed, press ESC key repeatedly until mode selection display appears.
Next, position data will be input.
16. Program Mode
Press F1 to select Position data.
15. Mode Selection Display
Press F1 to select Prog (Program) Mode.
F1 F2 F3 F4
Mode Select
Prog Play Parm Test
Prog
Posi Aprg
F1 F2 F3 F4
Posi
Mdi Teac Step Etc
F1 F2 F3 F4
Mdi - 1 No 1 [ 1 ] - 2
Inc Dec Clr Del
F1 F2 F3 F4
F1 F2 F3 F4
Mdi - 1 No 1 [ 1 ] - 2
xxxx.xxx
xxxx.xxx
Wrt Can Clr Etc
19. Press 100, then press RETURN key for X axis position
data. Press 100, then press RETURN for Y axis
position data.
Press F1 (Wrt: Writing) to save position data number 1
(100,100).
*Repeat the same process to input position data number
2.
18. Mdi Mode
Press 1 for position data number 1, then press the RE-
TURN key.
17. Position Data Editing (Go back to the display in Step
4, then press F1).
Press F1 to select Mdi Mode (position data direct
input).
Chapter 2. Operation