IAI America XSEL-S - Manual (Page 117)

8.
Appendix
111
Ɣ Method to put the coordinate data in order on In-Sight Explorer and output as a result
(Note) For the details, refer to Cognex Instruction Manual or the enclosed data (Sample.job).
ڏ Please contact IAI for a program file you need.
(1) Select Application Steps Ÿ Inspect Pact in In-Sight Explorer.
(2) Select Math from Add Tool and click the “Add” button.
(3) From the function select under the formula, select Text Ÿ Stringf and click “Insert”.
(4) For the content of the formula, fill in as shown below, or select the detection coordinates to
insert.
Stringf (“%+09.3f%+09.3f%+09.3f, Detection coordinate nY, Detection coordinate nX,
Detection coordinate nT)
(5) Repeat the steps 3) and 4) for the number of times for the number of the maximum
detectable n (8 pieces at maximum) of the used device.
(Example) When PatMax (1 – 10) is used for detection
Math_1:
Stringf(“%+09.3f%+09.3f%+09.3f,Pattern_2.Fixture.Y, Pattern_2.Fixture.X, Pattern_2.Fixture.Angle)
Math_2:
Stringf(“%+09.3f%+09.3f%+09.3f,Pattern_2.Fixture1.Y, Pattern_2.Fixture1.X, Pattern_2.Fixture1.Angle)
Math_3:
Stringf(“%+09.3f%+09.3f%+09.3f,Pattern_2.Fixture2.Y, Pattern_2.Fixture2.X, Pattern_2.Fixture2.Angle)
•
•
Select Detection Tool and the
detection coordinates become
available to select.
(1) (2) (3) (4) (5)
(6)