Parameter edit, 1. parameter edit items – IAI America IA-T-XD User Manual
Page 105
14. Parameter Edit
96
#%& 0B8 :
The edit data will be the by restoring power and executing software reset, only if the symbol edit
data was transmitted to the controller.
To save the data after restoring the power and executing software reset, write the data to Flash
ROM.
From the final editing screen, return to the Flash ROM writing screen with the ESC key.
To write the data to Flash ROM, press the F1 (Yes)
key.
If not, press the F2 (No) key.
During Flash ROM writing, “Please Wait....” blinks.
6C B @<< @D @ @@
0B8 D
Flash ROM writing is complete.
Return to the edit screen with the ESC key.
97
#& ?
You can change the parameters corresponding to your system.
When you change the parameters by yourself, please note the parameter contents.
Parameters will be valid by restoring the power or executing software reset after Flash ROM
writing.
Select the F1 (Edit) key on the mode selection
screen.
Select the F4 (Para) key on the edit screen.
#&# ?3?B
Parameter items will be displayed in the function key area.
Each time by pressing the SF key, items will be shifted and displayed.
Parameter Edit Items
I/O:
I/O parameter
Comn: All-axis common parameter
Axis: Each-axis parameter
Drv: Driver card parameter
Ecdr: Encoder parameter
IoSl: I/O slot card parameter
Othe: Other parameter
Select the parameter item to edit with function key.