IDEC WindMSG - Manual (Page 2)

Introduction
In this chapter. . . .
Purpose of this Manual
Introduction to HG1X
HG1X Series
HG1X-252
HG1X-452
Normal Operation:
Connect HG1X to PLC using the correct PLC-HG1X cable and your
HG1X is running.
1.1 Purpose of this Manual
The intention of this Operation Manual is to provide a guide for Safe
installation, Configuration and operation of HG1X series models.
Read this operation manual thoroughly before installing and
operating HG1X products.
This document is based on information available at the time of its
publication. While efforts have been made to be accurate, the
information in this document may not cover all the details or varia-
tions in hardware or software. Features described herein may not be
present in all hardwares. IDEC CORPORATION reserves the right to
update information in this publication without prior notice.
1.2 Introduction to HG1X
HG1X Series operator interfaces provide man-machine interface to
your PLC system. HG1X communicates with your PLC using serial
communication. HG1X models take power from PLC on their PLC
port.
Configuration of HG1X:
Each HG1X has to be configured using the WindMSG Software
before connecting it to the PLC.
Programming cable
for HG1X