Appendix a – IDEC WindMSG User Manual
Page 23
Appendix A
WindMSG Tutorials
Example to create Application
for HG1X
Tutorial 1:
Create an Application for HG1X
Model
We will create an application for HG1X-252 unit with internal tags
only. Follow the following steps:
1.
Run WINDMSG.EXE.
2.
After the main window is displayed, click on the New
Application icon
3.
From the New application dialog box, select required unit and
click to accept the selection made.
4.
As said earlier, this application is being developed with
internal tags only, hence we will not be adding any PLC in the
network. If user wants to add PLC in the network, click on the
Network Configuration icon
5.
Now we have to define tags required for the application. It is a
good practice to define the tags before developing the
application. To define Tags click on Tag Database icon.
Following dialog box will be displayed. Select required
register type and register address, enter your name for the
tag.
Click on Add button to accept the tag defined. To define
a coil, change the selection Tag-type. Enter coil number, tag
name and click to accept the tag entry.
Click on Close button to close the Tag Database
window.