Ip dvmrp prune-message-lifetime, Command mode, Description – Avaya P580 User Manual
Page 104: Syntax, Sample output, Systems, Ip dvmrp prune-message-lifetime -8
Chapter 7
7-8
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip dvmrp prune-message-lifetime
Command Mode
DVMRP Router Configuration.
Description
Sets the DVMRP prune message lifetime. Use the no form of this command
to return to the default value of 7200 seconds.
Syntax
Sample Output
The following example configures the IP DVMRP prune message lifetime
for fifteen hundred seconds.
(configure router:dvmrp)#
ip dvmrp prune-message-lifetime
1500
Systems
P550R, P580, P880, and P882.
To Configure:
ip dvmrp prune-message-lifetime <prune-lifetime>
To Restore
Default:
[no] ip dvmrp prune-message-lifetime
Table 7-6. Parameters, Keywords, Arguments
Name
Definition
<prune-lifetime>
The DVMRP upstream prune message lifetime. The
message lifetime is measured in seconds. The valid range is
100-7,200 seconds. The default setting is 7,200 seconds.