Avaya P580 - Manual (Page 279)

Document No. 10-300090, Issue 1 13-13
IPX
ipx output-rip-delay
Command Mode Interface Configuration.
Description Sets the interpacket delay for RIP updates sent on a single interface. The no
form of this command results in no interpacket delay. The default state is
enabled, which is a 55-millisecond delay.
Syntax
Sample Output The following example enables the interpacket delay for IPX output RIP
updates sent out on an interface labeled “boston”.
(config-if:boston)# ipx output-rip-delay
Systems P550R, P580, P880, and P882.
To Enable: ipx output-rip-delay
To Disable: [no] ipx output-rip-delay