Ip vrrp (timer), Command mode, Description – Avaya P580 User Manual
Page 749: Syntax, Sample output, Systems, Ip vrrp (timer) -9
Advertising
Document No. 10-300090, Issue 1
34-9
VRRP
ip vrrp (timer)
Command Mode
Interface Configuration.
Description
Set the advertisement timer value for the virtual router ID. Use the no form
of this command to restore the default value of 1.
Syntax
Sample Output
The following example sets the ip vrrp timer to 4 for virtual router 1 on an
interface labeled boston.
(config-if:boston)#
ip vrrp 1 timer 4
Systems
P550R, P580, P880, and P882.
To Configure:
ip vrrp <vr-id> timer <timer-value>
To Restore Default:
[no] ip vrrp <vr-id> timer
Table 34-6. Parameters, Keywords, Arguments
Name
Definition
<vr-id>
Virtual router ID.
<timer-value>
The advertisement transmit time. The range is 1 - 255. The
default value is 1.
Advertising
This manual is related to the following products: