Set huntgroup, Command mode, Description – Avaya P580 User Manual
Page 120: Syntax, Sample output, Systems, Set huntgroup -2
Chapter 8
8-2
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set huntgroup
Command Mode
Global Configuration.
Description
Creates a huntgroup, modifies an existing huntgroup or removes a
huntgroup. If no load-sharing value is specified, then a huntgroup is created
with load-sharing enabled. Use the clear huntgroup form of this command
to remove a huntgroup.
Syntax
Sample Output
The following example creates huntgroup hg1 and disables load-sharing.
(configure)#
set huntgroup hg1 load-sharing disable
HuntGroup “hg1” created
Systems
P550R, P580, P880, and P882.
To Configure:
set huntgroup <huntgroup-name> [load-sharing
{enable | disable}]
To Delete:
clear huntgroup <huntgroup-name>
Table 8-1. Parameters, Keywords, Arguments
Name
Definition
<huntgroup-
name>
The unique string used to identify a huntgroup. If the name
is not unique to the huntgroup, then it is assumed that an
existing huntgroup is being modified.
load-sharing
The load sharing capability.
• {enable | disable} - Enables or disables load sharing.