Set huntgroup auto-flush, Command mode, Description – Avaya P580 User Manual
Page 121: Syntax, Systems, Set huntgroup auto-flush -3
Document No. 10-300090, Issue 1
8-3
Hunt Groups
set huntgroup auto-flush
Command Mode
Global Configuration.
Description
Enables or disables the auto flush feature for the ports participating in a hunt
group.
When you enable auto flush for a hunt group, all AFT entries that were
learned on the hunt group are marked invalid if the links to all of the hunt
group ports fail. Once the AFT entries are marked invalid, they can be
learned on a redundant port. When auto flush is enabled, failover to a
redundant port occurs much sooner.
Syntax
Systems
P580 and P882.
To Enable:
set huntgroup auto-flush <huntgroup-name> enable
To Disable:
set huntgroup auto-flush <huntgroup-name> disable
Table 8-2. Parameters, Keywords, Arguments
Name
Definition
<huntgroup-name>
The huntgroup for which you want to enable or disable
auto flush.
{enable | disable}
Enable or disable the auto flush feature.