Ip igmp querier-timeout, Command mode, Description – Avaya P580 User Manual
Page 132: Syntax, Sample output, Systems, Ip igmp querier-timeout -6
Chapter 9
9-6
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip igmp querier-timeout
Command Mode
Interface Configuration.
Description
Sets the time that needs to elapse from the time the last query was heard
before this router takes over as a designated querier for the interface. The no
form of this command restores the default value of 255 seconds.
Syntax
Sample Output
The following example configures the time out period before the router
takes over as the querier on an interface labeled “boston” to 250 seconds.
(config-if:boston)#
ip igmp querier-timeout 250
Systems
P550R, P580, P880, and P882.
To Configure:
ip igmp querier-timeout <nbr-qry>
To Restore Default:
[no] ip igmp querier-timeout
Table 9-2. Parameters, Keywords, Arguments
Name
Definition
<nbr-qry>
The neighbor group querier timeout in seconds. The range is 30-
600 seconds. The default setting is 255 seconds.