Ip igmp query-max-response-time, Command mode, Description – Avaya P580 User Manual
Page 134: Syntax, Sample output, Systems, Ip igmp query-max-response-time -8
Chapter 9
9-8
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip igmp query-max-response-time
Command Mode
Interface Configuration.
Description
Configures the maximum response time advertised in IGMP queries. The
no form of this command restores the default value of 10 seconds.
Syntax
Sample Output
The following example configures the maximum response time advertised
in IGMP queries on interface labeled “boston” to 25 seconds.
(config-if:boston)#
ip igmp query-max-response-time 25
Systems
P550R, P580, P880, and P882.
To Configure:
ip igmp query-max-response-time <max-rsp-intvl>
To Restore
Default:
[no] ip igmp query-max-response-time
Table 9-4. Parameters, Keywords, Arguments
Name
Definition
<max-rsp-
intvl>
The maximum response time advertised in IGMP queries. The
valid range is 1-25 seconds. The default setting is 10 seconds.