Ip igmp query-timeout, Command mode, Description – Avaya P580 User Manual
Page 135: Syntax, Sample output, Systems, Ip igmp query-timeout -9
Document No. 10-300090, Issue 1
9-9
IGMP
ip igmp query-timeout
Command Mode
Interface Configuration.
Description
Sets the time that needs to elapse from the time the last query was heard
before this router takes over as a designated querier for the interface. The no
form of this command restores the default value of 255 seconds.
Syntax
Sample Output
The following example configures the time out period before the router
takes over as the querier on an interface labeled “boston” to 250 seconds.
(config-if:boston)#
ip igmp query-timeout 250
Systems
P550R, P580, P880, and P882.
To Configure:
ip igmp query-timeout <nbr-qry>
To Restore Default:
[no] ip igmp query-timeout
Table 9-5. Parameters, Keywords, Arguments
Name
Definition
<nbr-qry>
The neighbor group querier timeout in seconds. The range is 30-
600 seconds. The default setting is 255 seconds.