Clear intelligent-multicast static-client-port, Command mode, Description – Avaya P580 User Manual
Page 152: Syntax, Sample output, Systems, Clear intelligent-multicast static-client-port -8
Chapter 10
10-8
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
clear intelligent-multicast static-client-port
Command Mode
Global Configuration.
Description
Removes the specified manually added client port from an Intelligent
Multicast session.
Syntax
clear intelligent-multicast static-client-port {<group-address> | mac-
address <mac-address>} vlan {all | <vlan-id> | name <vlan-name>} port
<mod-port-spec>
Sample Output
The following example clears a static client port from an Intelligent
Multicast session.
(configure)#
clear intelligent-multicast static-client-port 225.1.1.2
vlan all port 3/2
Multicast Client successfully destroyed
Systems
P550R, P580, P880, and P882.
Table 10-4. Parameters, Keywords, Arguments
Name
Definition
<group-address>
The IP address of the multicast group for which the session
was created.
<mac-address>
The MAC address associated with the Intelligent Multicast
session.
vlan
The keyword for per VLAN commands.
• all - All VLANs
• vlan-id - The numerical ID of a specific VLAN.
• name - The VLAN name.
<mod-port-spec>
Switch port on a module.