Set intelligent-multicast static-client-port, Command mode, Description – Avaya P580 User Manual
Page 167: Syntax, Sample output, Systems, Set intelligent-multicast static-client-port -23
Document No. 10-300090, Issue 1
10-23
Intelligent Multicast
set intelligent-multicast static-client-port
Command Mode
Global Configuration.
Description
Adds a client port to a static Intelligent Multicast session.
Syntax
set intelligent-multicast static-client-port {<group-address> | mac-address
<mac-address>} vlan {all | <vlan-id> | name <vlan-name>} port <mod-
port-spec>
Sample Output
The following example assigns port 3.11 to a session for multicast group
229.10.10.10 on VLAN 4.
(configure)#
set intelligent-multicast static-client-port
229.10.10.10 vlan 4 port 3/11
Multicast Client successfully created
Systems
P550R, P580, P880, and P882.
Table 10-12. Parameters, Keywords, Arguments
Name
Definition
<group-address>
The multicast IP address of a static multicast session
<mac-address>
The multicast MAC Address of a static non-IP multicast
session.
vlan
The keyword for per VLAN commands.
• all - All VLANS.
• vlan-id - The numerical ID of a specific VLAN.
• name - The VLAN name.
port
The client port in the multicast session. <mod-port-spec>
is the port specifier for the static multicast client.