Ip bootp-dhcp agent-info, Command mode, Description – Avaya P580 User Manual
Page 196: Syntax, Systems, Ip bootp-dhcp agent-info -12
Advertising
Chapter 11
11-12
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip bootp-dhcp agent-info
Command Mode
Global Configuration.
Description
Enables BOOTP/DHCP option 82, suboption 2 (agentID). The no
command disables option 82, suboption 2.
This suboption identifies the IP address and, if available, the system name
of the switch. The default setting is disabled.
* Note:
Before you enter this command, make sure that the switch is set
to be a BOOTP/DHCP relay agent. Use the
command to enable BOOTP/DHCP relay agent on the switch.
Syntax
Systems
P550R, P580, P880, and P882.
To Enable:
ip bootp-dhcp agent-info
To Disable:
no ip bootp-dhcp agent-info
Advertising
This manual is related to the following products: