Ip telnet, Command mode, Description – Avaya P580 User Manual
Page 232: Sample output, Systems, Ip telnet -48
Chapter 11
11-48
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip telnet
Command Mode
Global Configuration
Description
Enables or disables Telnet and changes the TCP port number for Telnet.
Valid port numbers are 23 or a port number from 9000 through 65355.
Once you change the TCP port number for Telnet, only users who know the
new port number can start Telnet sessions to the switch.
Sample Output
The following example changes the TCP port for Telnet requests to port
9998:
(configure)#
ip telnet port 9998
TCP Telnet listening port was changed successfully
to 9998
Systems
P550R, P580, P880, and P882.
To Enable:
ip telnet {port [<tcp-new-port>] [enable] |
[enable]}
To Disable:
no ip telnet
Table 11-25. Parameters, Keywords, Arguments
Name
Definition
<tcp-telnet-port>
The TCP port number that you want to use for Telnet
requests. The default setting is port 23.
Valid port numbers are 23 or a port number from 9000
through 65355.
Once you change the TCP port number for Telnet, only
users who know the new port number can start Telnet
sessions to the switch.