Show ip route, Command mode, Description – Avaya P580 User Manual
Page 243: Syntax, Sample output, Systems, Show ip route -59
Document No. 10-300090, Issue 1
11-59
IP
show ip route
Command Mode
User
Description
Displays information about the IP unicast routing table.
Syntax
show ip route [{rip | ospf | local | unknown | static}] [<ip-addr>] [<if-
name>]
Sample Output
The following example displays the IP Route static information on the
switch.
>
show ip route static
0.0.0.0 0.0.0.0 via 192.168.0.1 cost=1
pref=low
Systems
P550R, P580, P880, and P882.
Table 11-33. Parameters, Keywords, Arguments
Name
Definition
rip
Displays all RIP routes.
ospf
Displays all OSPF routes.
local
Displays all local IP interfaces.
unknown
Displays all unknown routes.
static
Displays all static routes.
<ip-addr>
Displays routing information about the specified IP address.
<if-name>
Displays IP information about the interface.