Ip rip authentication mode, Command mode, Description – Avaya P580 User Manual
Page 254: Syntax, Sample output, Systems, Ip rip authentication mode -4
Chapter 12
12-4
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip rip authentication mode
Command Mode
Interface Configuration.
Description
Specifies the type of authentication mode used in RIP Version 2 packets.
Use the no form of this command to restore the default value of none.
Syntax
Sample Output
The following example specifies md5 the type of authentication mode to
use for interface labeled “boston”.
(config-if:boston)#
ip rip authentication mode md5
Systems
P550R, P580, P880, and P882.
To Configure:
ip rip authentication mode {simple | md5 | none}
To Restore Default:
no ip rip authentication mode
Table 12-3. Parameters, Keywords, Arguments
Name
Definition
{simple | md5 | none}
The authentication type used in RIP Version 2 packets.
Types include:
• simple - clear text authentication.
• md5 - keyed MD5 authentication.
• none - No authentication.