Ip rip receive version, Command mode, Description – Avaya P580 User Manual
Page 257: Syntax, Sample output, Systems, Ip rip receive version -7
Advertising
Document No. 10-300090, Issue 1
12-7
IP-RIP
ip rip receive version
Command Mode
Interface Configuration.
Description
Specifies a RIP version to receive on an interface basis. Use the no form of
this command to restore the default setting of RIP Version 1.
Syntax
Sample Output
The following example specifies that the interface labeled “boston” receive
RIP version 2 packets.
(config-if:boston)#
ip rip receive version 2
Systems
P550R, P580, P880, and P882.
To Configure:
ip rip receive version [1] [2]
To Restore Default:
no ip rip receive version
Table 12-5. Parameters, Keywords, Arguments
Name
Definition
[1] [2]
The version of the RIP packets received on an interface.
• 1 - accept RIP Version 1 packets.
• 2 - accept RIP Version 2 packets.
Advertising
This manual is related to the following products: