Ip rip send version, Command mode, Description – Avaya P580 User Manual
Page 258: Syntax, Sample output, Systems, Ip rip send version -8
Advertising
Chapter 12
12-8
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip rip send version
Command Mode
Interface Configuration.
Description
Specifies a RIP version to send on an interface basis. Use the no form of this
command to restore the default setting of RIP Version 1.
Syntax
Sample Output
The following specifies that the interface labeled “boston” send RIP version
2 packets.
(config-if:boston)#
ip rip send version 2
Systems
P550R, P580, P880, and P882.
To Configure:
ip rip send version [1] [2]
To Restore Default:
no ip rip send version
Table 12-6. Parameters, Keywords, Arguments
Name
Definition
[1] [2]
The version of the RIP packets sent out the interface.
• 1 - send RIP Version 1 packets.
• 2 - send RIP Version 2 packets
Advertising
This manual is related to the following products: