Network, Command mode, Description – Avaya P580 User Manual
Page 260: Syntax, Sample output, Systems, Network -10
Chapter 12
12-10
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
network
Command Mode
RIP Router Configuration.
Description
Enables RIP routing on a network or networks. The no form of this
command disables RIP routing.
Syntax
Sample Output
The following example enables RIP on the 11.0.0.0 subnet which is
connected to the 11.0.4.5 interface:
(configure router:rip)#
network 111.0.4.5 0.255.255.255
Systems
P550R, P580, P880, and P882.
To Enable:
network <ip-addr> [<wildcard-mask>]
To Disable:
no network <ip-addr> [<wildcard-mask>]
Table 12-8. Parameters, Keywords, Arguments
Name
Definition
<ip-addr>
IP address of the network of directly connected networks.
<wildcard-
mask>
The inverse of a network mask. Enter a 32-bit number in four-
part, dotted decimal format. Place ones in the bit positions that
you want to mask.
This parameter specifies a range of IP addresses. For example,
to specify all IP addresses in the 10.10.70 subnet, enter
10.10.70.0 0.0.0.255.