Avaya P580 - Manual (Page 269)

Document No. 10-300090, Issue 1 13-3
IPX
clear ipx route
Command Mode Global Configuration.
Description Deletes routes from the IPX routing table. This command only deletes
routes learned via the RIP routing protocol. Static and local routes cannot be
deleted using this command.
Syntax clear ipx route {<network> | default | *}
Sample Output The following example clears the entry for network 5 from the IPX routing
table.
(configure)# clear ipx route 5
Systems P550R, P580, P880, and P882.
Table 13-1. Parameters, Keywords, Arguments
Name Definition
{network | default |
*} Delete routes learned via the RIP routing protocol from the
IPX routing table.
• network - The number of the network whose routing
table entry you want to display. This is an eight-digit
hexadecimal number that uniquely identifies a
network cable segment. It can be a number in the
range 1 to FFFFFFFD. You do not need to specify
leading zeros in the network number. For example,
for the network number 000000AA, you can enter
AA.
• default - deletes the default route from the routing
table.
• * - Deletes all routes in the routing table.