Ipx output-sap-delay, Command mode, Description – Avaya P580 User Manual
Page 280: Syntax, Sample output, Systems, Ipx output-sap-delay -14
Advertising
Chapter 13
13-14
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ipx output-sap-delay
Command Mode
Interface Configuration.
Description
Sets the interpacket delay for Service Advertising Protocol (SAP) updates
sent on a single interface. The no form of this command results in no
interpacket delay. The default state is enabled, which is a 55 millisecond
delay.
Syntax
Sample Output
The following example sets the interpacket delay for SAP on an interface
labeled “boston”.
(config-if:boston)#
ipx output-sap-delay
Systems
P550R, P580, P880, and P882.
To Enable:
ipx output-sap-delay
To Disable:
[no] ipx output-sap-delay
Advertising
This manual is related to the following products: