Avaya P580 - Manual (Page 284)

Chapter 13
13-18 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ipx rip-max-packetsize
Command Mode Interface Configuration.
Description Enables the maximum packet size for RIP updates sent out the interface. To
restore the default packet size, use the no form of this command. The
default state is disabled.
Syntax
Sample Output The following example enables the maximum packet size for RIP updates
on an interface labeled “boston”.
(config-if:boston)# ipx rip-max-packetsize
Systems P550R, P580, P880, and P882.
To Enable: ipx rip-max-packetsize
To Disable: [no] ipx rip-max-packetsize