Ipx rip-multiplier, Command mode, Description – Avaya P580 User Manual
Page 285: Syntax, Sample output, Systems, Ipx rip-multiplier -19
Document No. 10-300090, Issue 1
13-19
IPX
ipx rip-multiplier
Command Mode
Interface Configuration.
Description
Sets the interval at which a network’s RIP entry ages out. The no form of
this command restores the default. The default value is three times the RIP
update interval.
Syntax
Sample Output
The following example sets the IPX RIP age-out interval on an interface
labeled “boston” to 40.
(config-if:boston)#
ipx rip-multiplier 40
Systems
P550R, P580, P880, and P882.
To Configure:
ipx rip-multiplier<multiplier>
To Restore Default:
[no] ipx rip-multiplier
Table 13-7. Parameters, Keywords, Arguments
Name
Definition
<multiplier>
The multiplier used to calculate the interval at which RIP routing
table entries age out. This can be any positive number.
The value you specify is multiplied by the RIP update interval to
determine the aging-out interval.